DRAM | TWELVE

dram-12-banners.jpg
 

DRAM | TWELVE loudspeaker

The DRAM TWELVE Loudspeaker is the flagship DRAM model, which utilisies many features from our Reference Loudspeaker range. DRAM TWELVE is a full range 3-way design that incorporates our unique multi layered cabinet construction. 36mm thick walls provide an extremely strong stiff and inert enclosure. An internal mid enclosure is also employed to isolate any unwanted intrusions to the all critical midrange performance. This loudspeaker is also available with the Alnico or Diamond tweeter options together with the DRAM copper and Silver wire options.


version: alnico

Speaker Type           3 way Bass Reflex floor standing loudspeaker
Bass/ Mid Drivers 1 x 300mm Bass- (treated paper)
1 x 220 mm Mid-bass Tweeter     35mm Fabric Dome with alnico magnet
Crossover ART Wirewound Inductors and  Claritycap Capacitors
Internal Wiring Dram Copper Reference
Binding Posts          Silver Plated terminals
Frequency Response         23Hz – 5o kHz ±3dB
Sensitivity 90 dB/for 1 watt@1metre
Impedance 8ohm nominal impedance
Recommended power       Min 8 watts
Cabinet  Multi-layer cold moulded cabinet available in both Piano Gloss and Polyester Finishes
Overall dimensions 1200mmH x 320mmD x 430mmW  (Cabinet)
Weight packed 60 kilos each


version: diamond

Speaker Type           3 way Bass Reflex floor standing loudspeaker
Bass/ Mid Drivers 1 x 300mm Bass- (treated paper)
1 x 220 mm Midrange- (Papyrus Cone Alnico magnet)
Tweeter 26mmDiamond Dome withTitanium voice coil former  Hexatech magnet array
Crossover Jensen Copper foil Inductors and Capacitors
Internal Wiring Dram Silver Reference
Binding Posts          Silver Plated terminals
Frequency Response         23Hz – 5o kHz ±3dB
Sensitivity 90 dB/for 1 watt@1metre
Impedance 8ohm nominal impedance
Recommended power       Min 8 watts
Cabinet  Multi-layer cold moulded cabinet available in both Piano Gloss and Polyester Finishes
Overall dimensions 1200mmH x 320mmD x 430mmW  (Cabinet)
Weight packed 60 kilos each

 

DRAM | EIGHT

Untitled-3.jpg
 

DRAM | EIGHT loudspeaker

As with the other DRAM models, the EIGHT's are a beautifully simple loudspeaker that will suit many musical fans. The cabinet is also utilising our new multi layered construction with the choice of Tweeters internal wire and components. The DRAM 8 has its Bass port firing down towards the integral stand allowing great flexibility in positioning of the speaker. The cabinets are finished with high gloss polyester Lacquer in any RAL colour and can also have any automotive finish applied with the deep gloss.


Version: Alnico

Speaker Type           2 way Bass Reflex Monitor loudspeaker
Bass- Mid Driver      1 x 220 mm Mid -Bass (Paper Cone)
Tweeter         35mm Fabric Dome with alnico magnet
Crossover     ART wirewound Inductors and ICW Capacitors
Internal Wiring          Dram Copper Reference
Binding Posts          Silver Plated terminals
Frequency Response         28Hz – 2o kHz ±3dB
Sensitivity      89 dB/for 1 watt@1metre
Impedance   8ohm nominal impedance
Recommended power       Min 8 watts
Cabinet  Multi-layer cold moulded cabinet available in both Piano Gloss and Polyester Finishes
Overall dimensions            1060mmH x 320mmD x 305mmW  (Cabinet)
Weight packed         30 kilos each


version: Diamond

Speaker Type           2 way Bass Reflex Monitor loudspeaker
Bass- Mid Driver      1 x 220 mm Mid -Bass (Paper Cone)
Tweeter 26mmDiamond Dome withTitanium voice coil former  Hexatech magnet array
Crossover Jensen Copper foil Inductors and Capacitors
Internal Wiring Dram Silver Reference
Binding Posts          Silver Plated terminals
Frequency Response         28Hz – 2o kHz ±3dB
Sensitivity      89 dB/for 1 watt@1metre
Impedance   8ohm nominal impedance
Recommended power       Min 8 watts
Cabinet  Multi-layer cold moulded cabinet available in both Piano Gloss and Polyester Finishes
Overall dimensions            1060mmH x 320mmD x 305mmW  (Cabinet)
Weight packed         30 kilos each

 

DRAM | MONITOR

Untitled-2.jpg
 

DRAM | MONITOR loudspeaker

The DRAM Monitor is an itch we have been wanting to scratch for some time now. We have been developing a new multi layered cabinet construction which results in an extremely inert and stiff enclosure and a choice of Alnico or Diamond tweeters matched to a coated paper Bass-Mid unit. An interesting feature is the upward firing Bass reflex port allowing huge flexibility in the placement of the speaker. Available with either DRAM copper or DRAM silver wire these speakers can purchased and later up graded to a higher spec model. The cabinets are finished with high gloss polyester Lacquer in any RAL colour and can also have any automotive finish applied with the deep gloss.


version: ALNICO

Speaker Type: 2 way Bass Reflex Monitor loudspeaker
Bass- Mid Driver: 1 x 220 mm Mid -Bass (Paper Cone)
Tweeter 35mm Fabric Dome with alnico magnet
Crossover ART wirewound Inductors and ICW Capacitors
Internal Wiring Dram Copper Reference
Binding Posts          Silver Plated terminals
Frequency Response         32Hz – 5o kHz ±3dB
Sensitivity 89 dB/for 1 watt@1metre
Impedance 8ohm nominal impedance
Recommended power       Min 8 watts
Cabinet  Multi-layer cold moulded cabinet available in both Piano Gloss and Polyester Finishes
Overall dimensions 550mmH x 320mmD x 305mmW  (Cabinet)
Weight packed 30 kilos each


VERSION: DIAMOND

Speaker Type           2 way Bass Reflex Monitor loudspeaker
Bass- Mid Driver x 220 mm Mid -Bass (Treated paper 30mm voice coil)
Tweeter 26mmDiamond Dome withTitanium voice coil former  Hexatech magnet array
Crossover Jensen Copper foil Inductors and Capacitors
Internal Wiring Dram Silver Reference
Binding Posts          Silver Plated terminals
Frequency Response         32Hz – 5o kHz ±3dB
Sensitivity 90 dB/for 1 watt@1metre
Impedance 8ohm nominal impedance
Recommended power       Min 8 watts
Cabinet  Multi-layer cold moulded cabinet available in both Piano Gloss and Polyester Finishes
cabinet avalible in Piano gloss  Polyester finishes
Overall dimensions 550mmH x 320mmD x 305mmW  (Cabinet)
Weight packed 30 kilos each